e. small beads in the respiratory zone versus large beads in the conductive zone), as distinct sizes of bacteria-containing LEE011 order beads should induce distinct inflammatory responses. To investigate this hypothesis further we used an Encapsulation
Unit Nisco Var J30 (NISCO Engineering AG, Zurich, Switzerland), which enables production of distinct sizes of P. aeruginosa containing seaweed alginate beads, through variation of nozzle size, air pressure and alginate flow rate. The aim of the present study was to study the course of chronic P. aeruginosa in groups of mice challenged with large or small P. aeruginosa-containing beads. The alginate enters through a central needle. The exit nozzle, which is centrally in line with the axis of the needle, has been countersunk externally, leading to the aerodynamic effect so that the jet has a smaller diameter when passing the nozzle than before at the needle. The needle is enclosed in a pressure chamber with an exit through the orifice. The size of the drop is determined by the nozzle size, the
product flow rate and the pressure inside the chamber. The product flow rate is controlled by a syringe pump to be connected to the product nozzle. The pressure chamber is controlled by the pressure-controlling unit. The pressure set point is fixed with a potentiometer. The clinical isolate P. aeruginosa strain PAO579 Selleckchem Talazoparib was propagated from a freeze culture for 18 h and grown for 18 h at 37°C in Ox-broth (Statens Serum Institute, Copenhagen, Denmark). The overnight culture was centrifuged at 4°C and 4400 g and the pellet resuspended in 5 ml serum-bouillon (KMA Herlev Hospital, Herlev, Denmark). Protanal triclocarban LF 10/60 (FMC BioPolymer N-3002 Drammen, Norway) was
dissolved in 0·9% NaCl to an alginate concentration of 1% and sterile filtered. The bacterial culture was diluted 1:20 in seaweed alginate solution. The solution was transferred to a 10-ml syringe and placed into a syringe pump (Graseby 3100; Ardus Medical Inc., Watford, UK). The syringe pump controls and feeds the alginate to the Encapsulation Unit Nisco Var J30. The J30 uses a pressure chamber containing a needle that controls the flow of alginate. The pressure chamber is controlled by the pressure controlling unit. The pressure set point is fixed with a potentiometer. The J30 unit is equipped with two connections, one for the alginate and one for the airflow that drives the alginate from the needle through the exit orifice into a gelleting bath (0·1 M, pH 7·0 Tris HCL buffer containing 0·1 M CaCl2). A magnetic stirrer (IKA RCT Basic; IKA®-Werke GmbH & Co. KG, Staufen, Germany) is placed underneath the gelling bath to prevent the beads from sticking together during gelling. The distance between nozzle and gelling bath of 11 cm and 280 rpm magnetic stirrer were kept constant. Five ml of alginate beads were made.