Studies involving high-resolution transmission electron NSC23766 chemical structure microscopy showed the conducting filaments in different systems [24, 44–48]; however, the switching mechanism is still clearly not understood. On the other hand, in the interface-type mechanism, the switching occurs at the interface of the metal and switching material, as shown in Figure 4b [49]. Several models have been reported for the driving mechanism

involved in an interface-type conducting path, such as electrochemical migration of oxygen vacancies [50–53], trapping of charge carriers (hole or electron) [54, 55], and a Mott transition induced by carriers doped at the interface [56–58]. To understand the difference between the filament and interface types of resistive switching, the area dependence of the RRAM device resistance

could be examined. In general, if the resistance of the LRS is independent of the device area and HRS varies inversely, the switching is filamentary. When both LRS and HRS increase with decreasing device area, the switching is PND-1186 mouse related to interface-type. Figure 4 Switching mechanism. (a) Filamentary conducting path model and (b) an www.selleckchem.com/products/sotrastaurin-aeb071.html interface-type conducting path model [15, 17]. Further, depending on the switching material and electrodes, the resistive switching memory can be divided into two types: cation-based switching called electrochemical metallization (ECM) memory and anion-based switching called valance change memory (VCM) [17]. In cation-based memory, a solid-electrolyte was used as a switching material and an electrochemically

active metal such as copper (Cu), silver (Ag), and Nickel (Ni) as TE and an inert metal as BE [17]. Generally, the ions of Cu and Ag were known as mobile ions. When positive voltage was applied on the Cu TE, for example, metallic Cu was reduced electrochemically to give Cu+ ions generated from metallic Cu due to anodic dissolution. These ions then diffused through the solid electrolyte due to electric field and reached to the BE where these ions reduced to become metallic Cu and electro-crystallize on the BE. As a result, a conducting filament grew preferentially from the BE and finally bridge the BE and TE. Consequently, the device switched to the LRS. That is the reason that ECM devices were also called conducting bridge RAM. When negative voltage was applied on the TE electrode, the Cu filament broken due to electrochemical medroxyprogesterone dissolution reaction initiated by an electronic current through the metallic bridge, and, in parallel, an electrochemical current and the device came into HRS. In recent years, many solid electrolyte materials such as GeSe x [11, 59, 60], GeS [61, 62], Cu2S [63], Ag2S [64], Ta2O5[65, 66], SiO2[67], TiO2[68], ZrO2[69], HfO2[70], GeO x [48], MoO x /GdO x [71], TiO x /TaSiO y [72], GeSe x /TaO x [46], CuTe/Al2O3[73], and Ti/TaO x [22] were reported. The VCM devices consist of a sub-stoichiometric switching material and an inert electrode such as Pt, Ir, Au, etc.