The close and open symbols denote the data calculated from the ascending and descending branches of the loops. In general, the vortex range reduces with the development of the dot asymmetry. For the circle dots, the angle dependence of the vortex range is not obvious because the vortex range is this website mainly dominated by the dot shape and the circle dot lacks the in-plane anisotropy. For the semicircle dots, the range is always 0 although the vortex does propagate through them, as discussed above. For the other asymmetric dots, the vortex range increases firstly and saturates to a value several hundreds of Osterds higher than those in their single Fe counterparts. The reason is believed

to be https://www.selleckchem.com/products/azd5582.html the Co magnetic poles appearing on the cutting surface. These poles facilitate the formation of the C-state, the precursor of a vortex, decreasing the nucleation field consequently. On the other hand, the vortex annihilation field is strengthened due to the same mechanism. Moreover, the moving path of the vortex core, still perpendicular to the field, deviates from the symmetry axis of these dots, i.e., the nucleation site is changed slightly due to the magnetostatic bias, an example of which can be seen in Figure 5d,e. Figure 6 The vortex range in the Fe layer on the easy axis direction of Co layer. The Co layer easy axis deviates from the applied

field direction by the angle of 0°, 30°, 60°, 90°. The asymmetric dots are characterized by α = 0, 0.25, 0.5, 0.75, 1. The solid and dash lines describe the vortex range calculated from the descending and ON-01910 nmr ascending branches of the Fe layer loop, respectively. An unexpected phenomenon is emerged in the α = 0.75 dot when θ exceeds 30°, where a vortex range of 2,740 Oe is even larger than that of 2,620 Oe in the circle dot. Compared with the circle dot, the C-state is easily formed to eliminate the Fe magnetic poles and compensate the Co poles in the asymmetric dots, which pushes the H n into the first quadrant in the

loop, as is the case when α = 0.75. But when α increases further, the C-state becomes more stable and difficult to be transformed to a vortex. In addition, the formed vortex in the more Tolmetin asymmetric dot has a shorter distance to walk, which decreases H a. Therefore, it is expected that a large vortex range only exists in the α window near 1. Conclusions Using micromagnetic simulations, the spin structure and magnetization reversal in Co/insulator/Fe trilayer nanodots are investigated in detail. Although the magnetization process is dominated mainly by the dot-shape asymmetry and the vortex chirality in Fe layer is thus determined by the field direction, the interlayer interaction between the two FM layers influences the Fe layer properties markedly. While an S-state is induced in the circle dots, the formation of C-state becomes easier in the asymmetric dots, which reduces the vortex nucleation field. The bias effect and vortex ranges in the asymmetric dots even larger than that in the circle dots are found.