The cooled groundwater is then re-injected into the cold well(s)

The cooled groundwater is then re-injected into the cold well(s). During summer, this cooled water can then be re-used. This process creates a cycle of seasonal thermal energy storage. Most ATES systems operate with only small temperature differences (ΔT < 15 °C) between the warm (<20 °C) and the cold (ca. 5 °C) wells in shallow aquifers PS-341 with an ambient groundwater temperature of about 11–12 °C. Worldwide, the number of ATES systems has been continuously increasing over the last 15 years and is expected to increase further in the future. In the Netherlands, the number of ATES systems has grown from around 29 installations in 1995 to around 1800 in 2012 (Bonte,

2013). Similar growth rates are reported in other European countries like Switzerland, Sweden and Germany (Sanner et al., 2003), in China (Gao et al., 2009) and in the US (Lund and Bertani, 2010), both for ATES and associated thermal energy storage systems such as Borehole

Thermal Energy Storage (BTES) (Bayer et al., 2012, Bonte et al., 2011b, Hähnlein et al., 2013, Lund et al., 2004, Lund et al., 2011 and Rybach, 2010). In Belgium there are much less ATES systems operational, about 20 large systems (>250 kW) in 2011, but there is also a rapidly growing demand. Because of this large growth, ATES systems are expected to be installed increasingly in the vicinity of drinking water production sites and protected nature areas. This leads to concerns by environmental regulators and drinking water companies about the environmental impacts of ATES installations, such as hydrological, thermal, Dichloromethane dehalogenase chemical and microbiological impacts (Arning et al., 2006, Bonte AG 14699 et al., 2011a, Brielmann et al., 2011, Brielmann et al., 2009, Brons et al., 1991, Griffioen and Appelo, 1993, Hall et al., 2008 and Zhu et al., 2011). In addition, according to EU environmental policy, these impacts should be minimized so that no detrimental effects can occur (EU-WFD, 2000). This study presents a review of published research about the interaction between ATES and groundwater chemistry. This review is illustrated by a new hydrochemical dataset from seven ATES systems in the northern

part of Belgium (Flanders). To asses the effect of the storage of thermal energy on the groundwater chemistry a literature review was conducted. The possible impacts of ATES were divided into the effects caused by changes in temperature and the effects caused by mixing different groundwater qualities. As a result of reactions between groundwater and the surrounding aquifer material, groundwater contains a wide variety of dissolved chemical constituents in various concentrations. Temperature changes can cause alteration of groundwater chemistry as temperature plays a very important role in the solubility of minerals, reaction kinetics, oxidation of organic matter, redox processes and sorption-desorption of anions and cations (Arning et al., 2006, Brons et al.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>